Separate names with a comma.
Click on photo to play video. [img]006 by Patrick Brown, on Flickr
This is pretty much where I am as of today. The car has been at the upholstery shop for a number of month. The guy doing the work has a demanding...
The car is void of any badging or emblems except for the grille. This ZO6 badge is a fender emblem from a 2003 ZO6. I kinda think is looks pretty...
More inner fender details. [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH]
Fender pics before install. [ATTACH] [ATTACH] [ATTACH]
These are the inner rock shields I made to prevent "rock stars" on the top of the front fenders. There was nothing originally which prevented...
The side glass is glued from the inside so an outer frame was needed to finish it off. I had a sheet metal shop bend up some long pieces so I...
Fortunately all the glass except the windshield is flat so having it made is fairly simple from a qualifies glass shop. [ATTACH] [ATTACH]
[ATTACH] [ATTACH]
The doors and tailgate were painted later. All of the paint was mixed at one time, all from the same can but....as you can see, the doors appear...
The front seats being used are Toyota Solara six way power and heated.
The entire inside has been covered in Fat Mat including the roof. This will provide insulation and a quiet ride. There will also be a foam...
I wrapped the exhaust system to help with heat penetration through the floor and a heat shield around the muffler to keep heat from the fuel tank....
I fabricated an air box that houses the air filter and cut a hole in the core support to access cold outside air in place of under hood warmer...
The original rear seat is a one piece bottom and a one piece back. The back folds forward for increased cargo area. I wanted a split back rear...
The color is Desert Khaki from a late model Subaru Crosstrek. I call it sagebrush. After having a black car, I wanted something that wouldn't show...
More to come tomorrow!!!
[ATTACH] [ATTACH] The radiator is from Entropy designed especially for the LS conversion. Using a single 2600 cfm Spaul fan assembly. I have...
A trip to the parts house with some bent up wire for patterns yielded good results. [ATTACH] [ATTACH] [ATTACH] [ATTACH]
[ATTACH] [ATTACH] [ATTACH] [ATTACH] [ATTACH] Dash turned out well. The gauge cluster is a Dakota Digital, audio is Kenwood and Vintage Air...
