Separate names with a comma.
Holley 2150 if that helps
Im having trouble finding the answer to this: Does the idle solenoid on my 84 only bump idle with ac, or always holds idle and lets off on shut...
I'm going to flush the cooling system, put a new battery in it, and adjust the timing and carb. Then it's ready to go.
I haven't been disposed of yet. She can be pretty mean when she needs to be. Fortunately, she likes it!
Maiden voyage today. We went 5 miles or so. She drove, of course. She loves it. [ATTACH] There are still some finishing items left. 4x4 and HVAC...
Well, I took the battery out of my 07 dodge diesel truck and it fits the battery try and hold down, but just by the nubbins. Factory spec is...
Didn't have to take the pump off, I just wasn't patient enough. I pulled the pump outlet line and ran it again on starting fluid. After 30 seconds...
Got the dizzy in, runs on starting fluid, not pumping fuel. Off with the pump again.
Well, it took about 75 seconds to get oil up to the pump, but once it got there it hasn't drained out. As soon as the oil got up to the pump it...
2018:[ATTACH]
Well, I dont see any way to prime this pump before install due to type it is. The only other way I could think to prime it would be to remove one...
Well I got it all together today. Except the exhaust, waiting on new studs for that. It fired right over on starting fluid. The battery was too...
I didn't use heat. I knew it might have made it easier, but I didnt want to harden the metal in case I had to drill on it.
Well, I tried a few different extractors and nothing got the broken studs out. I ended up drilling them out completely and chasing the threads...
No, it sure isn't. He was only 29 too. Way too young. Thank you
Not much progress today. I have a good friends funeral to go to, so not much in the mood to wrench. I did manage to get the overspray cleaned off...
Lol. 4 year old boots that keep on kicking. I have a new pair, but they started to stink something awful so they're in time out. Today's...
Oh, I'm sure it's not terribly hard. I've done engine swaps before. This jeep will be modified slightly, but I'll be keeping it period correct and...
The jeep is keeping par on this project again today. I attempted to get the broken studs out of the passenger manifold and they broke off flush....
Ross, I agree completely that I should throw a cam and bearings in it. If I still had the intake off, I might have done that. As for right now, I...
