Separate names with a comma.
Proper diagnosis first, if it's a burned or bent valve you might get by with just a valve job and not even need to remove the motor. A flat cam...
If your compression is good then I'd not worry about the cam, especially since the marks line up. Also since the loss of rower is concurrent with...
I remember this car! We met at a car show once, Grayslake if I my feeble mind serves me well. I really, really like this car, the pictures don't...
Yep, valve grinding paste. I suspect "Screw Grab" is simply the same thing rebranded.
An entire harness? that's a monumental task, sir. GM if available(pucker up!) or wreckers, I'd bet the farm nobody is reproducing these.
The only reason to degree a cam is to make the valve timing perfect, you can be off way more than the stack up of tolerances degreeing is meant to...
" I'd more into a 67?" Exactly, the '74-'77 are just awful. The later rubber bumper jobs were a bit better looking but just as awfully made. I...
Those crash bumper Camaros are turds. Fugly, the worst of the primitive emissions controls(12mpg and about 150 hp), uncomfortable, slapped...
Being a big fan of BMWs E34 chassis(5 series '89-'95) I have been watching this one. Someone paid dearly for exclusivity....
BT Any update? Inquiring minds want to know.
try posing your question here https://www.bimmerforums.com/forum/forumdisplay.php?322-2011-(F10) There are also a few very knowledgeable pros that...
No experience with those, sorry. BMW club or one of the BMW forums might have some insight if this is a common issue.
"Boxing" the control arms won't do anything but make them stiffer. If they are bent they will still be bent, just harder to un-bend. Replacing...
A "Mopar Man"that cannot distinguish between a big block and an LA series engine shouldn't be touching your car. NO Chrysler 400 or any big block...
What year is that Bavarian? I'm pretty well acquainted with some of the older E28,34 & 39 chassis.
Engines don't just seize up without some warning. Was it making noise? A bearing failure bad enough to lock the motor up WILL make noise first....
Great stuff. As a moderately delinquent youth I drove a '65 Olds 98 around a motocross track some other kids had built. Jumps and all. The Olds...
Do some searching for ABS re-builders, you'll save over O'Reilly's. Also check if it will need coding once installed, the dealer would love to...
That's a bit harsh, no? I've had good and bad experience. Like anything you get what you pay for. The bottom feeders will quote you a very low...
Good advice Grizz. Was your Toyota one of those effected by the cats disintegrating and the matrix going into the cylinders via reversion?
