Separate names with a comma.
well engine crapped out, there was a crack in the intake manifold that spead to the temp sending unit eventually and popped it out and is blowing...
I did bleed properly, it has two bleeders. well engine crapped out, there was a crack in the intake manifold that spead to the temp sending...
im not sure what joe is talking about, but if you don't have a standard orifice tube you need to check into that
don't use the ****ty kits they sell, they will last only a few months if you don't have a leak. to do it right, get compressor, this is the...
depending on age, I replace everything. 78 tbird got all new calipers flexi hoses and wheel cylinders, and only reason I didn't replace master...
autozone can usually look it up for you, if your stock call them and see, I always buy a couple jugs pure antifreeze and if that's not enough...
had a guy with a dodge with electronic ignition he could never get right and me and an old parts store vet I worked with helped him convert it to...
first you need to make sure if your coil needs to be 6v or 12v, some have a resistor line, you want to keep it stock and also check the voltage if...
ok thanks! my mechanic friend said hey that's too hot, and I said hell you don't even know what temp that is there are no markings on gauge, and...
no besides small oil loss no issues that are related to engine, I flushed with waterhose a few times then filled with water and a tad bit of tiki...
yeah im thinking its ok as far as oil because its not mixing, im a good shade tree mechanic but not a veteran and have very little experience with...
my system has two fans, a push fan and a pull fan, the push fan is much more powerful. now with ac on the pull fan runs constantly and the push...
I don't know if these are related, I do know that the intake gasket failed before I got the car because they never cleaned the return reservoir....
I have two tiny 3 inch lines to the intake that circulate through throttle body. all I had was high temp high pressure line for power steering...
I think I've come to the conclusion that this is either leftover stopleak from before intake repair or just dirt or minerals from tap water making...
Yeah I'm hoping it's ok I think just small debris is getting worked out. I found a spot the size of a pencil eraser at the bottom of the overflow...
I think I'll forgo the tstat for now. It seems to me it's working and when sitting still with no ac which would almost never happen it does rise...
Yep. They used to come dry I haven't done an ac job in years
