Separate names with a comma.
I was watching this on TV today, and there are a couple of scenes with a 91-96 Roadmaster wagon in them. Typical white with woodgrain. I did not...
It can become a disease.
I got my donor block back today, and it only cost me $440 to get it bored .030 over, and have the decks milled. He had to mill .007 off of the...
I finally got the old block out, and disassembled. Here are pics of the #7 cylinder, piston and what is left of the rod. I think the rust came...
It is the farthest back on the driver's side. I am curious as well, but it is really difficult to tell which went first, the piston, the bore, or...
I had an incident where the 454 in my 91 OCC decided to take a crap. I was going to get some barbecue ribs, and about halfway there a loud WONK,...
Could be a simple repair to get it running, unless there is a lot of body damage that we can't see.
I am headed for the garage to upgrade the 454 in my 91 Olds CC. I am also hoping to eliminate the overheating issue. I will try to remember to...
The 11 inch wide rears may be a little too wide for the wagon. The wagon originally has 7.5 inch wide wheels. An 8.5 inch wide Impala rim fits...
The fluid will warm up even without the pass through the radiator. You also eliminate overheating it if the engine ever runs hot, or overheats....
The Fitec and Holley are easy installs, and they self tune after inputting the parameters of your engine. They come with a handheld setup tool,...
I would use a heftier trans, and probably a 6L80E, but you need to make some tunnel modifications to use it. A 4L60E will also work if you have it...
The car height is dependent on the obstacles you will encounter on the road. Flat roads with few bumps and lumps will allow for a lower car with...
Amazon, Walmart, and Jegs. Jegs has a $10 discount or more depending on the purchase price.
Fitec, or Holley TBI fuel injection.
I am changing the tank in my 91 OCC (this applies to all 91-96 B body wagons). The hoses between the tank and filler neck are brittle, no longer...
There are small T pins under the upper and lower trim. There are also some holes. If you are permanently removing the trim, you need to fill the...
You can get the rollers from Rock Auto. Do NOT use the original oval sliders, or you will be doing the job over. Some of the "kits" come with a...
The vinyl will come off with a heat gun, but be careful not to get it too hot. The vinyl only extends about 1/16 inch under the surrounding trim,...
Forgot one thing...You can get an exhaust hanger for the left muffler from another 91-93 car. The one on the right will bolt up to the existing...