Separate names with a comma.
Yes have a look at the fast idle cam and check if it moves freely sometimes they get a little gummy and start to stick, I've seen it enough times...
I don't like that whoever installed the 454 left it backed with a T350, it may be rebuilt but a T400 should be in there.
Welcome to the rabbit hole.
Dollie sounds a lot like my wife Debra, Deb would help out in the garage and in the pits at the track when I ran S/A in the 90's, she'd even get...
Nice Mustang but I'd prefer the Mercedes that the roof leaning against the wall goes with.
I feel lucky that both of my parents are still going strong (80's), they still work around their home and either load the camper on the truck or...
you have the deepest sympathies from my wife and I.
He mentioned in the sale thread that they have 2 Collies which would make the Poncho quite a stand out at a dog park.
Congratulations and welcome to the forums.
Been there too many times, BTW: Welcome to the rabbit hole, invite the family to help you create your ride.
I have 2, the 85 W 123 wagon and a 81 W 126 sedan both of which run om617 turbo diesels and 722.3 transmissions, plus there is also a commonality...
I already have a couple of jobs lined up, I'll be replacing the steering box with a rebuilt unit plus rebuilding the original starter. I have the...
Got the Mercedes wagon back from the trans shop, had the 722.3 rebuilt plus some over due tsb work and updates done and now with the garage space...
Maybe I'm odd but I like the Rambler although I would have preferred a nice little 4 or 6 instead of the GM 8. [IMG] [IMG]
Hard to believe that I bought it April 1980 two months before graduating high school and three months before putting it in storage at my parents...
Like the title says after 40 years & 5 months I said good bye to a family member. On Sunday I helped load up my 66 7 Litre on to a flat bed for...
The first year C6 was a dual range trans, Low was low, D1 (green dot) was 1,2,3 and D2 was 2,3, my 66 & Litre has the same C6 although when I...
Happy to help, I remembered when jmt455 had his done because I was interested which process they used to metalize his reflectors since we use 2...
Nice little car but with non working a/c and that crease above the L/R tail lamp it doesn't likely to move at that price.
The plastic metalizing process is an aluminum deposition applied in a vacuum chamber which is sometimes sealed with a topcoat either in chamber or...
